We’re pleased to offer this great pair of signed Porcelier flush mounts, c. 1930. The porcelain has a very soft yellow color with original gold accents. Both sconces also have their original brass finials. They can use a cleaning and rewiring. Perfect for hallway, breezeway and entryway, larger bathroom, office, bedroom, etc. Measure 12″ wide by 7″ wide by 4 1/2″ long.

Find answers to most common questions…

The post Pair of signed Porcelier flush mounts appeared first on Old Lamps & Things, LLC.

This large gold washed brass flush mount fixture is an early Art Deco piece, c. 1920. It has four lights and a gold wash finish. It also has four pull-chain switches (condition unknown). It needs a good cleaning, a rewire, a center finial and four shades to complete it. Because of its size, this piece is quite versatile! It would be great in a breakfast nook, over an island, in a larger bathroom, in a bedroom, office, etc. Measures 18″ wide by 8″ long (plus shades).

Find answers to most common questions…

The post Large gold washed brass flush mount fixture appeared first on Old Lamps & Things, LLC.

This solid, petite Art Deco cast iron three-light ceiling fixture has lots of fine detail. It has cast iron shields between each of the lights and is c. 1930s. It also has its original brass finial in the center. In addition, each socket has brass acanthus leaves surrounding it. It needs a good cleaning, a rewire and a ceiling canopy. It would be perfect for a bathroom, guestroom, pantry, closet, over the kitchen sink, or in any other smaller space. Measures 11″ wide by 8 1/2″ long (plus the canopy).

Find answers to most common questions…

The post Petite Art Deco cast iron three-light ceiling fixture appeared first on Old Lamps & Things, LLC.

This vintage pair of brass mission style outdoor sconces really show their age! Their patina is rich. These are c. 1930s reproductions of an early 1800s kerosene lantern style. Both porcelain sockets are included; we did not test them to see if they work. One panel of glass needs to be replaced. In addition, one sconce needs a minor solder job where the crown meets the frame. A good cleaning and a rewire would bring these beauties back to life! Perfect for front or rear porch, patio, garage, etc. Each one measures 17 1/4″ high by 6 1/2″ wide by 6 1/2″ deep.

Find answers to most common questions…

The post Pair of brass mission style outdoor sconces appeared first on Old Lamps & Things, LLC.

Difficult-to-find porcelain enameled industrial ceiling flush mount with its original globe and switch. Therefore, it can be operated by the switch, or you can place in the “on” position and operate it by a wall switch.  This fixture is in very good original condition, c. late 1940s. With a good cleaning and rewire, it could really make a statement! Perfect for bathroom, over the kitchen sink, in a workshop, etc. Measures 11″ long by 9″ wide (including the globe); the canopy is 9″ across.

Find answers to most common questions about our antique light fixtures and the ordering process on our frequently asked questions page.

The post Porcelain enameled industrial ceiling flush mount appeared first on Old Lamps & Things, LLC.

Great hammered cast iron Art Deco sconce, possibly made by Lightolier but unsigned, c. 1920s.  Has stylish arrow design. This sconce has chipped black paint and is a bit rusty, but it has great potential for someone who wants to take the time to bring it back to life. It needs a shade with a 2 3/4″ fitter to complete it. Exposure to elements would be fine; no overhang needed to protect it from the weather. Perfect for anywhere outside! Measures 9 1/4″ high by 4 1/2″ at widest point of wall plate by 7 3/4″ deep without a shade.

Find answers to most common questions about our antique light fixtures and the ordering process on our frequently asked questions page.

The post Cast iron Art Deco sconce appeared first on Old Lamps & Things, LLC.

Single white porcelain sconce with pull-chain switch. Also has polarized external outlet facing front (may or may not work), c. 1950s. This sconce has some crazing (fine cracks from age) in the glaze; mentioning for accuracy. Can be used with a bare bulb, or a clip-on shade could be added if preferred. Perfect for bathroom, hallway, entryway, pantry, or any small space. Measures 3 1/2″ wide by 6 1/2″ high by 4 1/2″ deep without a shade.

Find answers to most common questions about our antique light fixtures and the ordering process on our frequently asked questions page.

The post Single white porcelain sconce appeared first on Old Lamps & Things, LLC.

Great set of three Sheffield-style sconces, all brass, each with single arm and rich patina, c. 1915-20. One of the switches has a paddle signed Hubbell; the other two paddles are marked Bryant. These sconces can face either up or down. They would be perfect for a bathroom, bedroom, hallway, staircase, pantry, etc.  If you need shades, please don’t hesitate to contact us. Each sconce measures 7 3/4″ high by 4 1/4″ wide by 7 1/4″ deep without shades.

Find answers to most common questions about our antique light fixtures and the ordering process on our frequently asked questions page.

The post Set of three Sheffield-style sconces appeared first on Old Lamps & Things, LLC.

Difficult-to-find set of three pewter sconces, each with a single light. Each one has a finger loop for easy transport and a pull chain switch (may or may not work), c. 1940. The candle covers are original. These can sit on a table or hang on a wall and will need to be wired to accommodate your preference. One is missing the loop at the top for hanging, but if you’re handy, you can come up with something! These would be perfect in a library, dining room, office, bedroom, entryway, etc. Measure 9 1/2″ high by 4 7/16″ wide by 4″ deep.

Find answers to most common questions about our antique light fixtures and the ordering process on our frequently asked questions page.

The post Set of three pewter sconces appeared first on Old Lamps & Things, LLC.

Single mission sconce signed Miller, all brass, with signed Hubbell paddle switch. The fitter ring collar is dated Feb. 23, ’04. You can operate this sconce at the fixture, or place it in the “on” position and use a wall switch. If you need a mission shade to complete it, please contact us. Perfect for a bathroom, pantry, bedroom, library, entryway, staircase, etc. Measures 5″ square by 5 1/2″ high by 5 9/16″ deep without a shade.

Find answers to most common questions about our antique light fixtures and the ordering process on our frequently asked questions page.

The post Single mission sconce signed Miller appeared first on Old Lamps & Things, LLC.